1. Engine

• Check Compression
• Run & flush
• Spray decarbonizer through engine
• Seal internal engine parts
• Spray engine with rust preventative
• Grease all fittings
• Check for proper operating temperature
• Test all safety features & check tilt operation

2. Lower Unit

• Change gearlube
• Remove prop, grease spline, check condition
• Check water pump output
• Check & replace anodes as needed

3. Fuel System

• Treat fuel with fuel conditioner
• Adjust carb if needed
• Check synchronization
• Check condition of fuel system
• Inspect fuel lines and filters

4. Electrical System

Outboard Basic Winterization Estimated Costs:

• 1 – 15hp: 1.0 to 1.5 Hours Labor plus parts
• 18 – 40hp: 1.5 to 2.0 Hours Labor plus parts
• 50 – 235hp: 2.0 to 3.5 Hours Labor plus parts

Four-Stroke engines add up to an additional Hour of Labor depending upon horsepower