Outboard Engine – Deluxe Winterize (Winterize with a Service)

1. Engine

  • Check compression
  • Run & flush
  • Spray decarbonizer through engine
  • Seal internal engine parts
  • Spray engine with rust preventative
  • Grease all fittings
  • Check for proper operating temperature
  • Test all safety features & check tilt operation

2. Lower Unit

  • Change gearlube
  • Remove prop, grease spline, check condition
  • Check water pump output
  • Check & replace anodes as needed

3. Fuel System

  • Treat fuel with fuel conditioner
  • Adjust carb if needed
  • Check sychronization
  • Check condition of fuel system
  • Inspect fuel lines and replace filters

4. Electrical System

  • Test battery, charge if needed
  • Check water level
  • Check charging system & spark output
  • Check battery connection & clean if needed

5. Boat

  • Check all accessories, instruments & lights
  • Check steering cable operation and grease
  • Remove drain plug and tape to steering wheel

6. Trailer

Check wheel bearings & brakes if applicable

Check lights, lube wich

Outboard Engine Deluxe Winterization Estimated Costs:

  • 1 – 15hp: 1.25 to 2.0 Hours Labor plus parts
  • 18 – 40hp: 2.0 to 3.0 Hours Labor plus parts
  • 50 – 235hp:3.0 to 4.0 Hours Labor plus parts

Four-Stroke engines add up to an additional Hour of Labor depending upon horsepower

Leave a Reply

Contact Information

Lighthouse Marine Inc
3720 Harborview Dr.
Gig Harbor, WA 98332
Driving Directions
253-858-7280
Email Us

Certifications & Education

Certifications

  • Certified Yamaha 5 Star Dealer
  • Certified Mercury Dealer since 1988
  • Certified Bombardier/OMC Dealer since 1988
  • Certified Volvo Service Provider

Associations

  • Members of the Northwest Trade Association Since 1988
Archives
Business Website Design by Berry