1. Engine

• Run & flush
• Seal internal engine parts
• Spray engine with rust preventative
• Grease all fittings
• Check for proper operating temperature
• Test all safety features & check tilt operation

2. Engine

• Change engine oil and filter
• Check all belts & tighten if needed
• Drain all sea water & fill with antifreeze
• Clean flame arrestor
• Test FWC anti-freeze if needed

3. Lower Unit

• Change gearlube
• Remove prop, grease spline, check condition
• Check water pump output
• Check & replace anodes as needed
• If anodes need to be replaced this is at customer’s option.
  **Anodes can be $20.00 – $150.00 above described estimate upon drive

4. Fuel System

• Treat fuel with fuel conditioner
• Adjust carb if needed
• Check condition of fuel system
• Inspect fuel lines and replace filters

5. Electrical System

• Test battery, charge if needed
• Check water level
• Check charging system & spark output
• Check battery connection & clean if needed

Sterndrive Basic Winterization Estimated Costs:

• 4 cyl: 2.65 to 3.0 Hours Labor plus parts
• 6 cyl: 3.0 to 3.5 Hours Labor plus parts
• 8 cyl: 3.5 to 4.0 Hours Labor plus parts